Water Heater Plumbing Service in Jacksonville, FL (32206)

Date: April 8, 2025

City: Jacksonville, FL

ZIP Code: 32206

Plumber Notes: Upon arrival, we started by clearing out all of the old paint cans and other construction material out of our way. I started by mounting the washing machine box to get my height of where I needed it to be. I then cut into the existing 2 inch schedule 40 PVC to tie into for the drain of the washing machine box. I installed a P-trap and tied into the existing 2 inch vent that is in the wall for the kitchen sink. I then ran the hot and cold lines coming down from the washing machine box to the existing hot and cold lines inside the wall. We turn the water off to the building and made our hot and cold ties. We waited one hour before turning on the water to the unit to ensure the glue had enough time to cure. After waiting an hour, we slowly turn the water on making sure that there are no leaks on all of the works. We have completed and bleeding all air out of the system. After making sure there is no leaks on any of the waterlines we insulated the waterlines and tape them together for extra rigidity. We then made a small hole for the dryer vent to be ran at a later date. No leaks detected. Insulated. Water is ON